應用場景
全自動一次成型往復吹瓶機 化工桶吹塑機 中空擠出機 吹瓶
| 類別Category | 先普系列全電動 Samp Type Series Full-Electric | |||
| 機型 Model | S2-200+02-85-6 | |||
| 項目 | Items | 單位 Units | 參數Specification | |
| 基本參數 Specification |
類別 | Category | / | 單層 1 Layer |
|
制品最大容積
|
Max. Blow Volume
|
L | 0.5 | |
| 適用原料 | Material | / | HDPE,PP | |
| 模頭坯料數量 | QTY Of Die Head | / | 6 | |
| 常用模頭中心距 | Die Head Distance (Center to Center) | mm | 100 | |
| 機器凈重約 | Net Weight | kg | 約15000 | |
| 機器外形尺寸 | Machine Dimension | mm L×H×W | 約4800*3100*5000 | |
| 模頭 Die Head |
模頭加熱段數 | Die Head Heating Zone | / | 14 |
| 模頭加熱功率 | Die Head Heating Power | kW | 8.6 | |
| 鎖模架系統 Carriage system |
模架數量 | QTY Of Station | / | 2 |
| 最小合模距 | Min Mold Closing Distance | mm | 200 | |
| 最大開模距 | Max Mold Openning Distance | mm | 160 | |
| 模板尺寸 | Effective Dimension Of Mold Plate | (mm,W×H) | W600×H345 | |
| 擺架行程 | Carriage Stroke | (mm) | 750 | |
| 鎖模力 | Clamping Force | kN | 125 | |
| 擠出系統 Extruder Unit |
螺桿直徑 | Extruder Diameter | mm | 85 |
| 螺桿長徑比 | Extruder Length/Diameter Ratio | L/D | 24 | |
| 螺桿轉速 | Extruder Rotating Speed | r/min | 20-66 | |
| 最大塑化能力 | Max Extrusion Capacity | kg/h | 130 | |
| 擠出電機額定功率 | Extruder Motor Rated Power | (kW) | 30 | |
| 機筒加熱段數 | Barrel Heating Zone | / | 3 | |
| 機筒加熱功率 | Barrel Heating Power | kW | 15 | |
| 冷卻風機功率 | Cooling Fan Power | kW | 0.54 | |
| 動力系統 Power Unit |
油泵電機額定功率 | Oil Pump Motor Rated Power | kW | / |
| 液壓系統額定工作壓力 | Hydraulic System Rated Working Pressure | Mpa | / | |
| 氣動系統額定工作壓力 | Pneumatic System Rated Working Pressure | Mpa | 0.8 | |
| 水冷系統額定工作壓力 | Cooling System Rated Working Pressure | Mpa | 0.4 | |
| 通用制品耗氣量（壓縮后） | Universal product air consumption(compressed) | m³/h | 29 | |
| 熱切刀變壓器功率 | Hot Cutter Power | kW | 2 | |
| 裝機總功率I | Total Installed Power | kW | 90.34 | |
| 備注 Remarks |
液壓油牌號/油箱容積 | Hydraulic oil NO. / tank volume | L | / |
| 冷水機選型（風冷/水冷） | Chiller recommend (air-cooled/water-cooled) | hp | 15/10 | |
| 空壓機選型（加儲氣罐） | Air compressor recommend (Add gas storage tank) | hp | 10 | |
| 備注： 1、各機型的加熱功率與模頭配置有關，因模頭配置不同，可能出現加熱功率稍有差異的情況。 2、本參數表僅供參考，實際機型參數可能會有所調整。 |
||||
| Note: 1. The heating power of each model is related to the configuration of the die head. Due to the different configuration of the die head, there may be a slight difference in heating power. 2. This parameter list is for reference only, and the actual model parameters may be adjusted. |
||||
樂善智能證券代碼：871695
