
樂善產品
全自動一次成型往復吹瓶機 化工桶吹塑機 中空擠出機 吹瓶
說明:
歡迎致電0757-28376168,咨詢訂購。
查找您附近的購買網點



| 類別Category | 先普系列全電動Samp Type Series Full-Electric | ||||
| 機型Model | S1-450+01-90+75-1 | ||||
| 項目 | Items | 單位Unit | 參數 | ||
| 基本參數 Specification |
類別 | Category | / | 直線導軌Linear Guide Way | |
| 制品最大容積 | Max. Blow Volume | L | 30 | ||
| 適用原料 | Material | / | HDPE,PP | ||
| 模頭坯料數量 | QTY Of Die Head | / | 1 | ||
| 常用模頭中心距 | Die Head Distance (Center to Center) | mm | / | ||
| 機器凈重約 | Net Weight | kg | 約18000 | ||
| 機器外形尺寸 | Machine Dimension | mm,L×H×W | 約5.37*5.39*4.4 | ||
| 模頭 Die head |
模頭加熱段數 | Die Head Heating Zone | / | 3 | |
| 模頭加熱功率 | Die Head Heating Power | kW | 13.8 | ||
| 鎖模架系統 Carriage system |
模架數量 | QTY Of Station | / | 1 | |
| 最小合模距 | Min Mold Closing Distance | mm | 500 | ||
| 最大開模距 | Max Mold Openning Distance | mm | 950 | ||
| 鎖模板尺寸 | Mold Plate Size | mm W×H | 600x700 | ||
| 擺架行程 | Carriage Stroke | (mm) | 900 | ||
| 鎖模力 | Clamping Force | kN | 280 | ||
| 擠出系統 Extruder system |
螺桿直徑 | Extruder Diameter | mm |
90 |
75 |
| 螺桿長徑比 | Extruder Length/Diameter Ratio | L/D |
24 |
24 |
|
| 螺桿轉速 | Extruder Rotating Speed | r/min |
66 |
20~78 |
|
| 最大塑化能力 | Max Extrusion Capacity | kg/h |
160 |
90 |
|
| 擠出電機額定功率 | Extruder Motor Rated Power | kW |
37 |
22 |
|
| 機筒加熱段數 | Barrel Heating Zone | / |
4 |
3 |
|
| 機筒加熱功率 | Barrel Heating Power | kW |
17 |
9 |
|
| 動力系統 Power system |
插筆電機額定功率 | Blow Pin Motor Rated Power | kW |
3 |
/ |
| 鎖模電機額定功率 | Mold clamping Motor Rated Power | kW |
11 |
/ | |
| 擺架電機額定功率 | Carriage Motor Rated Power | kW |
7.5 |
/ | |
| 抬頭電機額定功率 | Head Lifing Motor Rated Power | kW |
2.2 |
||
| 平臺升降電機額定功率 | Platform Lifing Motor Rated Power | kW |
1.5 |
||
|
潤滑油泵電機額定功率 |
Rated power of lubricating oil pump motor | KW |
/ |
||
|
氣動系統額定工作壓力 |
Pneumatic System Rated Working Pressure | Mpa |
0.8 |
||
|
水冷系統額定工作壓力 |
Cooling System Rated Working Pressure | Mpa |
0.4 |
||
|
耗氣量 |
Air Consumption | m³/h |
28 |
||
| 熱切刀變壓器功率 | Hot Knife Transformer Power | kW | 2 | ||
|
裝機總功率I |
Total Installed Power I |
kW |
126 |
||
| 備注1 Note 1 | 以上機型均可搭載100點壁厚控制系統,疊加后改變的參數如下 The above models can be equipped with 100-point parison control system. The parameters to be changed after superposition are as follows. |
||||
| 電動壁厚控制 Servo parison control |
機型 | Model | / | S1-450+01-90+75-1 | |
| 壁厚伺服電機額定功率 | Parison Servo Motor Rated Power | kW | 7.5 | ||
| 裝機總功率II | Total Installed Power II | kW |
133.5 |
||
| 備注2 Note 2 | 以上機型均可搭載后置機械手,疊加后改變的參數如下 The above models can be equipped with robot hand. The parameters to be changed after superimposition are as follows. |
||||
|
機械手Robot hand |
機型 | Model | / | S1-450+01-90+75-1 | |
| 主軸電機額定功率 | Spindle Motor Rated Power | kW | 1.5 | ||
| Y軸電機額定功率 | Y-axis Motor Rated Power | kW | 0.75 | ||
| 裝機總功率III | Total Installed Power III |
KW |
135.75 | ||
| 鎖模板示意圖 Clamping plate | ![]() |
||||
| 備注: 1、各機型加熱功率與模頭配置有關,因模頭配置不同,可能出現加熱功率稍有差異的情況 2、本參數表僅供參考,實際機型參數可能會有所調整 |
|||||
| Note: 1. The heating power of each model is related to the configuration of the die head. Due to the different configuration of the die head, there may be a slight difference in heating power. 2. This parameter list is for reference only, and the actual model parameters may be adjusted. |
|||||









樂善智能證券代碼:871695