高性價比系列
全自動一次成型往復吹瓶機 化工桶吹塑機 中空擠出機 吹瓶
說明：
歡迎致電0757-28376168，咨詢訂購。
查找您附近的購買網點
| 類別Caterory | U型機系列(直線導軌）/U Series(Linear Guide Way) | |||||
| 機型 | SCJ 65-45-25U2×2.5F | |||||
| 項目 | Items | 單位 Units | 參數Specification | |||
| 基本參數 Specification |
類別 | Category | / | 雙層+液位線 2 layers with view stripe | ||
| 制品最大容積 | Max. Blow Volume | L | 2 | |||
| 適用原料 | Material | / | PE,PP | |||
| 模頭坯料數量 | Qty.Of Die Head | / | 1 | |||
| 常用模頭中心距 | Die Head Distance (Center to Center) | mm | 120，160 | |||
| 機器凈重約 | Net Weight | kg | 8500 | |||
| 機器外形尺寸 | Machine Dimension | mm，L×H×W | 4400X2450X3600(2150) | |||
| 模頭 Die Head |
模頭加熱段數 | Die Head Heating Zone | / | 4 | ||
| 模頭加熱功率 | Die Head Heating Power | kW | 5 | |||
| 鎖模架系統 Carriage system |
模架數量 | Qty.Of Station | / | 2 | ||
| 最小合模距 | Min Clamping Distance Of Mold | mm | 230 | |||
| 最大開模距 | Max Clamping Distance Of Mold | mm | 580 | |||
| 模板尺寸 | Effective Dimension Of Mold Plate | mm W×H | 300X400 | |||
| 擺架行程 | Carriage Stroke | (mm) | 500 | |||
| 鎖模力 | Clamping Force | kN | 80 | |||
| 擠出系統 Extruder Unit |
螺桿直徑 | Extruder Diameter | mm | 65 | 45 | 25 |
| 螺桿長徑比 | Extruder Length/Diameter Ratio | L/D | 24 | 21 | 22 | |
| 螺桿轉速 | Extruder Rotating Speed | r/min | 20-67 | 20-40 | 10~25 | |
| 最大塑化能力 | Max Extrusion Capacity | kg/h | 60 | 14 | 2 | |
| 擠出電機額定功率 | Extruder Motor Rated Power | kW | 15 | 5.5 | 2.2 | |
| 機筒加熱段數 | Barrel Heating Zone | / | 3 | 3 | 2 | |
| 機筒加熱功率 | Barrel Heating Power | kW | 7 | 4.5 | 1.7 | |
| 冷卻風機功率 | Cooling Fan Power | kW | 0.12 | 0.04 | / | |
| 動力系統 Power Unit |
油泵電機額定功率 | Oil Pump Motor Rated Power | kW | 7.5 | ||
| 液壓系統額定工作壓力 | Hydraulic System Rated Working Pressure | Mpa | 16 | |||
| 氣動系統額定工作壓力 | Pneumatic System Rated Working Pressure | Mpa | 0.8 | |||
| 水冷系統額定工作壓力 | Cooling System Rated Working Pressure | Mpa | 0.4 | |||
| 通用制品耗氣量（壓縮后） | Universal product air consumption(compressed) | m³/h | 14 | |||
| 熱切刀變壓器功率 | Hot Cutter Power | kW | 2 | |||
| 裝機總功率I | Total Installed Power I | kW | 50.56 | |||
| 備注 Remarks |
液壓油牌號/油箱容積 | Hydraulic oil NO. / tank volume | L | 46#/200 | ||
| 冷水機選型（風冷/水冷） | Chiller recommend (air-cooled/water-cooled) | hp | 10/8 | |||
| 空壓機選型（加儲氣罐） | Air compressor recommend (Add gas storage tank) | hp | 10 | |||
| 備注/Remarks： | 以上機型均可疊加100點壁厚控制系統，疊加后改變的參數如下/All the machines above can be optionally equipped with 100 points parison control system,parameters would be changed as below: | |||||
| 疊加壁厚控制后 After with 100 points parison control |
機型 | Model | / | SCJ 65-45-25U+S2X2.5F | ||
| 壁厚油泵電機額定功率 | Parison Motor Rated Power | kW | 5.5 | |||
| 裝機總功率II | Total Installed Power II | kW | 56.06 | |||
| 模板尺寸 | Effective Dimension Of Mold Plate | (mm) | ||||
 |
||||||
| 備注： 1、各機型加熱功率與模頭配置有關，因模頭配置不同，可能出現加熱功率稍有差異的情況 2、本參數表僅供參考，實際機型參數可能會有所調整 |
||||||
| Note: 1. The heating power of each model is related to the configuration of the die head. Due to the different configuration of the die head, there may be a slight difference in heating power. 2. This parameter list is for reference only, and the actual model parameters may be adjusted. |
||||||
樂善智能證券代碼：871695
