
樂善產品
全自動一次成型往復吹瓶機 化工桶吹塑機 中空擠出機 吹瓶







| 機型Model | S1-250+02-75-55-25-2 | |||||
| 項目 | Items | 單位Unit | 參數 | |||
| 基本參數 Specification |
類別 | Category | / | 雙層+液位線 | ||
| 制品最大容積 | Max. Blow Volume | L | 4L | |||
| 適用原料 | Material | / | HDPE,PP | |||
| 模頭坯料數量 | QTY Of Die Head | / | 2 | |||
| 常用模頭中心距 | Die Head Distance (Center to Center) | mm | 280 | |||
| 機器凈重約 | Net Weight | kg | 約12000 | |||
| 機器外形尺寸 | Machine Dimension | mm,L×H×W | 約L 4656×W 3058×H3428 | |||
| 模頭 Die head |
模頭加熱段數 | Die Head Heating Zone | / | 7 | ||
| 模頭加熱功率 | Die Head Heating Power | kW | 24.79 | |||
| 鎖模架系統 Carriage system |
模架數量 | QTY Of Station | / | 1 | ||
| 最小合模距 | Min Mold Closing Distance | mm | 250 | |||
| 最大開模距 | Max Mold Openning Distance | mm | 500 | |||
| 鎖模板尺寸 | Mold Plate Size | mm W×H | 692X490 | |||
| 擺架行程 | Carriage Stroke | (mm) | 750 | |||
| 鎖模力 | Clamping Force | kN | 240 | |||
| 擠出系統 Extruder system |
螺桿直徑 | Extruder Diameter | mm |
75 |
55 |
25 |
| 螺桿長徑比 | Extruder Length/Diameter Ratio | L/D |
24 |
23 |
22 |
|
| 螺桿轉速 | Extruder Rotating Speed | r/min |
20-60 |
20-48 |
10-25 |
|
| 最大塑化能力 | Max Extrusion Capacity | kg/h |
90 |
25 |
2 |
|
| 擠出電機額定功率 | Extruder Motor Rated Power | kW |
22 |
7.5 |
2.2 |
|
| 機筒加熱段數 | Barrel Heating Zone | / |
3 |
3 |
2 | |
| 機筒加熱功率 | Barrel Heating Power | kW |
9.6 |
6.4 |
4 |
|
| 冷卻風機功率 | Cooling Fan Power | kW |
0.3 |
0.08 |
/ | |
| 動力系統 Power system |
插筆電機額定功率 | Blow Pin Motor Rated Power | kW |
4.5 |
||
| 鎖模電機額定功率 | Mold clamping Motor Rated Power | kW |
7.5 |
|||
| 擺架電機額定功率 | Carriage Motor Rated Power | kW |
7.5 |
|||
| 抬頭電機額定功率 | Head Lifing Motor Rated Power | kW |
2 |
|||
| 平臺升降電機額定功率 | Platform Lifing Motor Rated Power | kW |
2.2 |
|||
|
潤滑油泵電機額定功率 |
Rated power of lubricating oil pump motor | KW |
0.1 |
|||
|
熱切刀變壓器功率 |
Hot Knife Transformer Power | KW |
2 |
|||
|
氣動系統額定工作壓力 |
Rated working pressure of pneumatic system | Mpa |
0.8 |
|||
|
水冷系統額定工作壓力 |
Cooling System Rated Working Pressure | Mpa |
0.4 |
|||
|
通用制品耗氣量(壓縮后) |
Gas consumption of general products (after compression) |
m³/h |
18 |
|||
| 電動壁厚控制 Servo parison control |
壁厚伺服電機額定功率 | Parison Servo Motor Rated Power | kW |
4.5 |
||
|
裝機總功率 |
裝機總功率 | Total installed power |
kW |
15/10 | ||
| 備注: 1、各機型加熱功率與模頭配置有關,因模頭配置不同,可能出現加熱功率稍有差異的情況 2、本參數表僅供參考,實際機型參數可能會有所調整 |
||||||
| Note: 1. The heating power of each model is related to the configuration of the die head. Due to the different configuration of the die head, there may be a slight difference in heating power. 2. This parameter list is for reference only, and the actual model parameters may be adjusted. |
||||||







樂善智能證券代碼:871695